Aprilia RSV4 Factory SE-09 SBK 1100 | Nový motocykl

Dostupnost: skladem

Popis:

Aprilia RSV4 1100 Factory SE-09 SBK 1100
Limitovaná edice N. 226

RSV4 factory SE-09 SBK 1100 - technical specifications
engine TYPE Aprilia 4 longitudinal 65° V4 cylinder, 4-strokes, liquid cooling system, double overhead camshaft (DOHC), four valves per cylinder
BORE AND stroke
81 x 53.32 mm total engine capacity 1.099 cc
compression ratio
13.6: 1 maximum power AT crankshaft 217 HP (159.5 kW) at 13,000 rpm
maximum torque AT crankshaft
125 Nm at 10,500 rpm power supply Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management.
transmission
6-speed cassette type gearbox
Gear lever with Aprilia Quick Shift electronic system (AQS) clutch Multi plate wet clutch with mechanical slipper system
primary drive
Straight cut gears and integrated flexible coupling, drive ratio: 73/44 (1,659) secondary drive Chain: Drive ratio: 41/16 (2,562)
controls management
APRC system (Aprilia Performance Ride Control) that includes engine maps (AEM), engine brake control (AEB), traction control (ATC), wheelie control (AWC), launch control (ALC), cruise control (ACC), speed limiter (APT). 6 riding modes (3 Road, 3 Track) chassis Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and angle, engine height, swingarm pin height Smart EC 2.0 electronically managed Öhlins steering damper
front suspension
Smart EC 2.0 electronically managed Öhlins NIX fork.? 43 mm stanchions, with TIN surface treatment Aluminium radial calliper mounts, adjustable in hydraulic compression and rebound damping and spring pre-load, 125 mm travel REAR suspension Upside-down double braced aluminium swingarm; Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggy-back, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping. 115 mm travel
brakes
Front: Dual 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo Stylema (R) monobloc radial callipers with 4? 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose
Rear: 220 mm diameter disc; Brembo calliper with two? 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose
Bosch ABS with cornering function and 3 map settings, equipped with RLM (Rear wheel Lift-up Mitigation) strategy wheels Forged aluminium alloy wheels, completely machined, with 5 split spoke design. Front: 3.5”x17” Rear: 6”x17”
tyres
Radial tubeless.
front: 120/70 ZR 17
rear: 200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17) dimensions Wheelbase: 1435.8 mm Length: 2055 mm Width: 735 mm Saddle height: 845 mm Headstock angle: 24.6°
Trail: 104.5 mm
KERB weight
202 kg (90% fuel) emissions compliance Euro 5
consumption
6.90 litres/100 km CO2 emissions 160 g/km
FUEL TANK capacity
17.9 litres (including 4-litre reserve)

 

K dispozici na webu prodejce:
https://motoin.cz/motocykl/aprilia-rsv4-factory-se-09-sbk-1100/

Prodejce: MOTO IN s.r.o.

Web: http://www.motoin.cz/